DIN ISO 16000-14
Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry (ISO 16000-14:2009)
Auf einen Blick
- Englischer Titel
-
Innenraumluftverunreinigungen - Teil 14: Bestimmung der Summe gasförmiger und partikelgebundener polychlorierter dioxin-ähnlicher Biphenyle (PCB) und polychlorierter Dibenzo-p-dioxine/Dibenzofurane (PCDD/PCDF) - Extraktion, Reinigung und Analyse mit hochauflösender Gaschromatographie und Massenspektrometrie (ISO 16000-14:2009)
- Erscheinungsdatum
- 2012-03
- Herausgeber
- Engl. VDI/DIN-Kommission Reinhaltung der Luft (KRdL) - Normenausschuss
- Zugehörige Handbücher
- Seitenanzahl
- 65
- Erhältlich in
- Deutsch
- Kurzreferat
-
This part of DIN ISO 16000 describes the extraction, clean-up and analysis of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) from indoor air samples. After sampling on a filter and a back-up vapour trap (see DIN ISO 16000-13) the filter and the back-up vapour trap are extracted. The clean-up and the separation into a PCB and a PCDD/PCDF fraction are performed by column chromatography. For the analysis high-resolution gas chromatography combined with high-resolution mass spectrometry (HRGC/HRMS) is employed. Losses during extraction and clean-up are detected and compensated by using isotopically-labelled surrogates as internal extraction standards for quantification, together with recovery standards that are added just before the HRGC/HRMS analysis. The method provides accurate quantitative data for tetra- through deca-PCBs and tetra- through octa-PCDDs/PCDFs. It is capable of detecting 0,2 pg/m3 or lower concentrations of most PCBs and PCDFs/PCDDs with air sampling volumes up to 360 m3 or more in special cases. However, it may not be possible to detect all analytes at 0,2 pg/m3 or lower, especially at lower sampling volumes. Precision under normal conditions can be expected to be ± 25 % or better and uncertainty ± 50 % or better. Sampling of PCBs, PCDDs/PCDFs is described in ISO 16000-13; it is part of the overall PCB/PCDD/PCDF measurement procedure. The sampling strategy to analyse PCBs, PCDDs/PCDFs and PAHs in indoor air is described in DIN ISO 16000-12.
