VDI/VDE manual Production Measurement Technology

VDI Standardisation Work - Principles and procedures

Human exposure to mechanical vibrations - Whole-body vibration

Human exposure to mechanical vibrations - Whole-body vibration - Corrigendum concerning standard VDI 2057 Part 1:2017-08

Human exposure to mechanical vibrations - Hand-arm vibration

Human exposure to mechanical vibration - Hand-arm vibration - Corrigendum concerning guideline VDI 2057 Part 2:2002-09

Effect of mechanical vibrations on human beings - Assessment

Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings

Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings - Corrigendum concerning guideline VDI 2057 Part 3:2006-06

Inspection process management - Identification, classification and proof of suitability for inspection processes

Inspection process management - Identification, classification and proof of suitability for inspection processes - Corrigendum concerning standard VDI/VDE 2600 Blatt 1:2013-10

Inspection process management - Determination of the measurement uncertainty of complex inspection processes

Inspection process management - Determination of the measurement uncertainty of complex inspection processes - Corrigendum concerning standard VDI/VDE 2600 Part 2:2022-11

Requirements on the surface structure to cover function capability of surfaces manufactured by cutting - List of parameters

Roughness measurement - Roughness measurement using contact (stylus) instruments (profile method) - Set-up, measurement conditions, procedure

Surface measurement - Specification of surface conditions in technical product documentation

Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement

Measuring methods for surfaces; practical measurement of the bearing portion of a surface

Testing geometric quantities - Combined contour and roughness measurement - Basics, terms and definitions, and device description

Acceptance test of gear holes for spur gears with involute toothing

Measurement of gearing tools - Measuring of hobs

Computer-aided evaluation of profile and helix measurements on cylindrical gears with involute profile

Tangential composite and radial composite inspection of cylindrical gears, bevel gears, worms and worm wheels

Determination of tooth contact patterns for gearings

Exchange format for gear data - Gear Data Exchange Format (GDE Format) - Definition

Exchange format for gear data - Gear Data Exchange Format (GDE Format) - Definition - Corrigendum concerning standard VDI/VDE 2610:2021-03

Profile and helix checking of involute cylindrical gears

Measurement and testing of gears - Evaluation of profile and helix measurements on cylindrical gears with involute profile

Testing of involute cylindrical gears; profile testing

Testing of involute cylindrical gears; tooth trace testing

Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments

Measurement and testing of gears - Testing and monitoring of devices for gear measurement

Pitch and runout testing on gearings - Cylindrical gears, whormwheels, bevel gears

Hardness testing of metallic materials; selection criteria: methods of hardness testing, application, advantages-disadvantages, range of hardness test, error limits

Hardness testing of metallic materials

Hardness testing of plastics and elastomers

Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement

Accuracy of coordinate measuring machines - Characteristics and their testing - Form measurement with coordinate measuring machines

Accuracy of coordinate measuring machines - Characteristics and their testing - Interim check of coordinate measuring machines with artefacts

Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation

Accuracy of coordinate measuring machines; characteristic parameters and their checking - Coordinate measuring machines with optical probes - Basics

Accuracy of coordinate measuring machines - Characteristics and their testing - Code of practice to the application of DIN EN ISO 10360-7 for coordinate measuring machines equipped with image processing systems

Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360-8 to coordinate measuring machines with optical distance sensors

Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation

Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines

Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines - Corrigendum concerning standard VDI/VDE 2617 Blatt 8:2018-10

Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets

Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries

Accuracy of coordinate measuring machines - Characteristics and their testing - Acceptance and reverification tests for optical CMM measuring microgeometries according to DIN EN ISO 10360-8 and VDI/VDE 2617 Part 6.2

VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors

Testing instructions for checking gauges and measuring tools; introduction

Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement

Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principles

Inspection of measuring and test equipment - Test instruction for gauge blocks

Inspection of measuring and test equipment - Testing instruction for cylindrical setting gauges, plug gauges and ring gauges

Inspection of measuring and test equipment - Test instruction for conical gauges

Inspection of measuring and test equipment - Test instruction for cylindrical measuring pins/pins for screw threads

Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers

Inspection of measuring and test equipment - Test instruction for setting standards for thread micrometers

Inspection of measuring and test equipment - Test instruction for test cylinders and test mandrels

Inspection of measuring and test equipment - Test instruction for gap gauges

Inspection of measuring and test equipment - Test instruction for zylindrical screw setting play gauges and screw check plugs

Inspection of measuring and test equipment - Test instruction for cylindrical screw setting ring gauges, screw ring gauges

Inspection of measuring and test equipment - Test instruction for straight edges

Inspection of measuring and test equipment - Test instruction for knife edge straight edges

Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels

Inspection of measuring and test equipment - Test instructions for surface plates

Inspection of measuring and test equipment - Test instruction for protractors

Inspection of measuring and test equipment - Test instruction for steel squares 90°

Vernier callipers

Inspection of measuring and test equipment - Test instruction for tape measures and scales

Verniers for depth measurement

Inspection of measuring and test equipment - Test instruction for callipers for external, internal and depth dimensions

Inspection of measuring and test equipment - Testing instruction for depth callipers

Inspection of measuring and test equipment; Test instruction for height callipers

Verniers for height measurement

Inspection of measuring and test equipments - Test instructions for micrometers

Inspection of measuring and test equipment - Test instruction for micrometers for screw thread measurement and other measurement purposes

Inspection of measuring and test equipment - Test instructions for micrometers with dial indicator

Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Test instruction for micrometer heads

Inspection of measuring and test equipment - Test instruction for depth micrometers

Inspection of measuring and test equipment - Test instruction for height micrometers

Inspection of measuring and test equipment - Test instruction for internal micrometers with 2-point contact

Inspection of measuring and test equipment - Test instruction for internal micrometers and internal measuring instruments with 3-line contact

Dial gauges

Inspection of measuring and test equipment - Test instructions for dial indicators for linear measurement with mechanical indication

Inspection of measuring and test equipment - Test instructions for lever gauges

Inspection of measuring and test equipment - Test instruction for mechanical dial gauges

Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges

Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges, Corrigendum concerning standard VDI/VDE/DGQ/DKD 2618 Blatt 11.4:2020-08

Inspection of measuring and test equipment - Test instruction for lever gauges (quicktests) for external measurement

Inspection of measuring and test equipment - Test instructions for lever gauges (quicktests) for internal measurements

Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact

Inspection of measuring and test equipment - Test instruction for electrical linear measuring devices consisting of inductive probe and measuring device

Internal micrometers for three-point measurement

Inspection of measuring and test equipment - Test instruction for height gauges

Inspection of measuring and test equipment - Test instruction for height gauges

Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines

Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines, Corrigendum concerning standard VDI/VDE/DGQ 2618 Part 17.1:2014-12

Inspection of measuring and test equipment - Test instruction for length setting instruments

Straight edges

Knife edges

Inspection of measuring and test equipment - Test instruction for special gauges and test equipment

Steel squares 90°

Special gauges and test equipment

Propagation of limited errors in measuring - Principles

Propagation of error limits in measurements; examples on the propagation of errors and error limits

Quality management supported by knowledge-based systems - Recommendations

Calibration of measuring equipment for electrical quantities - Fundamentals

Calibration of measuring equipment for electrical quantities - Fundamentals - Calibration and display measurement quantities

Calibration of measuring equipment for electrical quantities - Methods for the determination of the uncertainty of measurement

Calibration of measuring equipments for electrical quantities - Digital multimeters

Calibration of measuring equipment for electrical quantities - Oscilloscopes

Calibration of measuring equipment for electrical quantities - Function generators

Calibration of measuring equipment for electrical quantities - Calibration of DC power supplies

Calibration of measuring equipment for electrical quantities - Universal counter

Calibration of measuring equipment for electrical quantities - Direct-current resistors

Calibration of measuring equipment for electrical quantities - Calibration of shunts at DC

Calibration of measuring equipment for electrical quantities - Test equipment for checking the safety of electrical devices - Electrical devices according to DIN VDE 0701-0702

Calibration of measuring equipment for electrical quantities - Test equipment for checking the safety of electrical devices - Electrical devices in medical technology according to DIN EN 62353 (VDE 0751-1)

Calibration of measuring equipment for electrical quantities - Test equipment for the determination of the electrical safety - Electrical equipment according to DIN VDE 0100 and DIN VDE 0105

Calibration of measurement equipments for electrical quantities - High-frequency fieldstring meters

Calibration of measuring equipment for electrical quantities - Spectrum analysers

Calibration of measurement equipment for electrical quantities - Test receiver

Calibration of measuring equipment for electrical quantities - HF signal generators with analog modulation

Calibration for measuring equipment for electrical quantities - Artificial mains networks

Calibration for measuring equipment for electrical quantities - Artificial mains networks

Calibration of measuring equipment for electrical quantities - Passive measuring equipment for use in EMC-applications - Current clamps

Calibration of measuring equipment for electrical quantities - Characterisation of HF-measuring cables

Calibration of measuring equipment for electrical quantities - Direct-voltage measuring amplifiers

Calibration of measuring equipment for electrical quantities - Clamp-on probes (DC and NF-AC)

Calibration of measuring equipment for electrical quantities - Clamp-on probes (DC and NF-AC) - Corrigendum concerning standard VDI/VDE/DGQ/DKD 2622 Part 23.1:2017-02

Calibration of measuring equipment for electrical quantities - DC and LF power meter

Format for data exchange in management of measuring and test equipment - Definition of the Calibration Data Exchange format (CDE format)

Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems

Measuring rooms - Classification and characteristics - Planning and execution

Measuring rooms - Guide for planning

Automated visual inspection; description of the testing task

Accuracy of contour-measuring systems - Characteristics and checking of characteristics - Acceptance testing and reverification testing of contour-measuring systems according to the tactile stylus method

Accuracy of contour-measuring systems - Characteristics and their testing - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces

Computed tomography in dimensional measurement - Fundamentals and definitions

Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements

Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors

Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors - Corrigendum concerning standard VDI/VDE 2630 Part 2.1:2015-06

Form measurement - Principles

Form measurement - Determination of the deviation by sensor technology and signal transmission

Measurement of form - Properties and selection of filters

Form measurement - Determination of the radial spindle deviation

Form metrology - Determination of the axial spindle deviation

Form measurement - Determination of the straightness deviation of the linear guide

Form measurement - Determination of positional deviations of the form-measurement axes

Form measurement - Stability monitoring of form measuring systems

Form measurement - Examples for measurement and analysis conditions

Form measurement - Determination of the uncertainty of form measurements

Form measurement - Determination of the uncertainty of form measurements - Corrigendum concerning standard VDI/VDE 2631 Part 10:2014-12

Form measurement - Spectral analysis (Fourier analysis, harmonic analysis)

Machine vision - Basics, terms, and definitions

Machine vision - Preparation of a requirement specification and a system specification

Machine vision/industrial image processing - Acceptance test of classifying machine vision systems

Machine vision/industrial image processing - Acceptance test of classifying machine vision systems - Test of classification performance

Machine vision/industrial image processing - Surface inspection systems in flat steel production - Stability testing

Machine vision/industrial image processing - Surface inspection systems in flat steel production - Performance evaluation of classification

Optical form measurement - System requirements - Standard form

Optical 3D measuring systems - Imaging systems with point-by-point probing

Experimental structural analysis - Metallic bonded resistance strain gauges - Characteristics and test conditions

Experimental structual analysis - Recommendation on the implementation of strain measurements at high temperatures

Certification of courses and examinations in strain gauge measurement technology

Qualification in fastening technology - Appropriate qualification for employees and executives

Qualification in fastening technology - Evaluation guide for evaluation of trainers

Characteristics of force transducers - Terms and definitions

Characteristics of torque transducers

Capability test for fastening technology - Machine capability test - MCT

Capability test for bolting technology machines - Process capability test (PFU)

Torque measuring devices/measuring chains - Minimum requirements in calibrations

Torque measuring devices/measuring chains - Minimum requirements in calibrations - Corrigendum concerning standard VDI/VDE 2646:2019-12

Type test of nutrunning tools - Torque and torque/angle checking

Sensors and measuring systems for rotation angle measurement - Instructions for traceable calibration - Directly measuring rotation angle measuring systems

Sensors and measuring systems for rotation angle measurement - Instructions for traceable calibration - Indirectly measuring rotation angle measuring systems

Tranducers and measuring systems for measurement of angle - Instructions for traceable calibration - Indirect measure angle measuring systems

Sensors and measuring systems for rotation angle measurement - Instructions for traceable calibration - Basics

Rotary tools for bolted connection - Guideline for comparative power-measurements of hydraulic impulse tools

Characterization and measurement of cutting edges - Terms, characteristics, and parameters

Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement

Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement

Optical metrology of microtopographies - Calibration of interferometers and interference microscopes for form measurement

Determination of geometrical quantities by using of scanning probe microscopes - Calibration of measurement systems

Minimum restrictions for application of fastening systems and tools - Applications in the automotive industry

Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary

Grinding data exchange interface - Basics and definiton

Prerequisites for the implementation of process computing systems

System requirement/specification for planning and design of automation systems

Control of process plants via VDU's; general aspects and definitions

Control of process plants via VDU's; preformated displays

Evaluation of the soiling properties of surfaces - Test method for the dust soiling behaviour of solar energy systems

Testing of connectorised and non-connectorised polymer optical fibres (POF) - Terms and definitions

Testing of connectorised and non-connectorised polymer optical fibres (POF) - Testing of optical parameters

Testing of connectorised and non-connectorised polymer optical fibres (POF) - Testing of mechanical characteristics, environmental influences and aging behaviour

Testing of connectorised and non-connectorised polymer optical fibres (POF) - Power budget

Measurement procedures for quality control in precision moulding of aspherical, freeform and microoptics

Preparation and cleaning of mould inserts and specimens to ensure reliable quality control measurements in the production chain of precision glass moulding

Calibration of test and measuring equipment in automotive - Fundamentals and decision rule

Calibration of test and measuring equipment in automotive - Brake testers